This protocol is very important !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
When the drone starts the pre-planed flying mission, there will be some time it disconnected from the controller!!!
If you sent the drone back to its original position as you indicate in mission planning details, it will fly back to the place where its starts. When the battery drop below to 10 percent, it will forced landing. No matter if there is a person, or an object. Therefore, in the worst case, there will be someone die.
This protocol is very important !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
If the battery of drone is around 30%, please land it manually as soon as possible. The flying time for a drone which is using Lidar is about 25mins.
The reason for that is because the real amount of power left is not accurate, and it will decrease really fast when its power is low. And again, if the battery is lower the 10%, it will land forcefully.
This protocol is relatively important
Although, most of the obstacles can be avoided (it means the drone just stop) such as walls, and buildings, trees and so on, there are something that the system cannot assure the 100 percent detection accuracy that is the wire and line. So don’t relay on the system too much.
The common way to solve this problem is by setting the attitude to a high enough value so there will be no obstacles there.
Otherwise, you may loose about 300, 000 RMB.